QADS™
Saves time, energy and money
on paint drying and curing
Speed without compromising quality
 QADs™ is an innovative and internationally patented Junair system that supplies additional air flow from the corners of the spraybooth cabin. The clean, filtered and heated air provided by the ETL listed QADs™ creates the ideal environment for the fast, controlled flash off of waterborne base-coats and the rapid through curing of low VOC top coats.
The disruptive airflow from the QADs™ nozzles, together with an elevated air temperature accelerates the evaporation of water from the paint coating. Unlike some other systems, QADs™ covers the whole vehicle in one operation ensuring consistent drying of waterborne base-coats.
Unrivalled performance on the curing cycle
 Conventional spraybooths are inefficient in raising the lower panels of a vehicle to the required curing temperature. This is because warm air rises to the top of the cabin whilst cooler air descends to floor level. Also, the air passing over the lower panels has already been cooled by the substrate above. Differences of 10-15°C are not uncommon in conventional booths, leading to extended baking times, taking up more valuable booth time and energy.
Heated air from QADs™, however, envelops the whole vehicle including the lower panels, ensuring that the recommended temperature is achieved quickly. On most spraybooth ovens QADs™ will achieve the lower panel temperature of 60°C within 10 minutes, specified by many of today’s motor manufacturers. It is no coincidence that QADs™ are exported extensively worldwide
For further information, download the Qads™
( PDF 685KB) product leaflet.
Acrobat Reader is required to view PDFs. Download for free if needed.
|
